null

BMR 15-17 S550 Mustang Front & Rear Sway Bar Kit w/ Bushings - Red - SB043R

(No reviews yet) Write a Review
$564.99
SKU:
BMRSB043R
UPC:
887753326300
Availability:
Regularly stocked product
Weight:
31.70 LBS
Width:
16.60 (in)
Height:
5.00 (in)
Depth:
55.10 (in)
Shipping:
Calculated at Checkout
Category:
Suspension>Sway Bars
MPN:
SB043R
Proposition 65:
N

Product Overview

BMR Suspension's SB043 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 35mm (front) and 25mm (rear)DOM steel tubing, the SB043 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality.Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB043 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. BMR Suspension designed the SB043 sway bar kit for street performance, autocross, and road race applications. The large adjustable sway bars' three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bars. The SB043 front sway bar gives you a 28%-70% increase in sway bar rate, and the rear bar gives you a 63%-208% increase in rate over the stock bar. These rate increases and adjustability allow you to fine-tune the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB043 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, which equals better handling.

This Part Fits:

YearMakeModelSubmodel
2019-2020FordMustangBullitt
2015-2020FordMustangEcoBoost
2015-2020FordMustangEcoBoost Premium
2015-2020FordMustangGT
2015FordMustangGT 50 Years Limited Edition
2015-2020FordMustangGT Premium
2015-2020FordMustangShelby GT350
2016-2020FordMustangShelby GT350R
2020FordMustangShelby GT500
2015-2017FordMustangV6

Reviews

(No reviews yet) Write a Review